Your Maytag dryer is flashing a code — here's what it's telling you, whether you can fix it yourself, and when to call an OKC dryer specialist. Codes can vary by model year, so confirm against your manual.
Power failure during the cycle.
Likely cause: Power was interrupted mid-cycle.
What to do: Restart the cycle. Frequent PF codes without outages point to a board or outlet issue.
Restricted airflow.
Likely cause: A clogged vent or lint screen — the dryer senses poor exhaust flow.
What to do: Clean the lint screen and vent. If it returns after a full cleaning, the airflow sensor or ducting needs a look.
Low or no line voltage to the heater.
Likely cause: An electrical supply problem — often one leg of the 240V supply, a breaker, or the outlet.
What to do: Needs electrical diagnosis; sometimes a tripped half-breaker, sometimes the cord or outlet.
Door not sensing as closed.
Likely cause: Door strike or door switch fault.
What to do: Confirm the door latches firmly; if it persists, the switch needs replacing.
Thermistor (temperature sensor) fault.
Likely cause: Failed sensor or wiring.
What to do: The sensor should be tested and replaced by a technician.
Slow drying, no heat, a burning smell, or just due for a cleaning? Book online or call an OKC-metro dryer specialist today.
